La Crosse Technology WS-3610 - Manual (Page 23)

20
12.1 Operating and Setting the Wind Direction Alarm
In the Wind Direction display, the display of minimum or
maximum values is unnecessary. However it is possible to set
wind direction alarms.
Call up the corresponding menu in the bottom section of the LCD
by touching the center of the WIND field.
Proceed by touching ٭DIR AL٭.
In the following menu up to 16 separate alarms can be set
clockwise around the compass rose from N through NNW in
steps of 22.5°. (0° through 337.5°) Here the wind direction can
be selected by touching ٭UP٭ or ٭DOWN٭ and switched ON or
OFF with (Wind Direction) by touching ٭ON/OFF٭ in the upper
left part of the menu display.
The wind alarm feature can be enabled, or completely
deactivated by touching the ٭ON٭ and ٭OFF٭ fields in the menu
shown below.
Touch ٭EXIT٭ to return to normal display.