La Crosse Technology C86234 - Manual (Page 9)

FUNCTION BUTTONS
SET
• Hold for 3 seconds to enter the SET mode, where the following can be changed: LCD
contrast, Manual time setting, 12/24 hour time display, Date setting, °F/°C temperature
unit, Wind speed unit, Rainfall unit, Pressure unit, Relative pressure reference setting,
Weather tendency threshold setting, Storm warning threshold setting, Storm Alarm On/
Off setting, Wind direction display type, and Factory reset
• Press to toggle between the display of Mode 1 or Mode 2:
o Mode 1: "Wind speed + outdoor temp + 24 hr. pressure history graph"
o Mode 2: "Gust + Dew Point temp + 72 hr. pressure history graph "
• In the weather alarm setting mode, press to switch the weather alarm On / Off
• In the weather alarm setting mode, press and hold to adjust the weather alarm value
• Stop the weather alarm when ringing
▲/DATE
• Press to toggle between the display of seconds or date in the time display
• Press to increase the level of different settings in SET mode
• Press and hold to re-learn the thermo-hygro sensor synchronization
• Press to reset the MIN/MAX record when in MIN/MAX display mode
• Stop the weather alarm when ringing
▼/RAIN
• Press to switch the rainfall display mode: Total, 1h, 24h, week, month
• Press to decrease the level of different settings in SET mode
• Synchronize the display with the PC (see Heavy Weather Pro Software User’s Guide)
(must use usb stick).
• Stop the weather alarm when ringing
ALARM
• Press to enter the time alarm and weather alarm setting mode
• Confirm particular alarm setting
• Press to exit the manual setting mode
• Stop the alarm when the time alarm or weather alarm rings
• Press to exit max/ min record display mode
• Stop the weather alarm when ringing
P a g e | 9