K-Patents SAFE-DRIVE - Manual (Page 9)

Installation Instructions for K-Patents SAFE-DRIVE® Process Refractometer PR-23-SD Upgrade Kits
© Copyright K-Patents 2014. All rights reserved.
9
4.4 Installation of Generation 2 Nozzle Assembly
Figure 6 Installation of the wash nozzle
To re-install the wash nozzle assembly
1. Insert the wash nozzle assembly to its place (1). Tighten up 32 mm nozzle nut with a
combination wrench
2. Place the nozzle guide plate in the correct position and tighten the two (2) M5 bolts (2)
3. Secure the wash nozzle bolts with a locking plate (3, 4).