K-Patents SAFE-DRIVE - Manual (Page 8)

Effective: May 1, 2014
8
Figure 4 Removal of Gen 1 nozzle assembly
1. Close the steam connections
2. Detach the steam line
3. Open safety cover M5 Allen screw (1)
4. Detach the safety cover over the nozzle nut (2)
5. Remove three M5x8 screws (3, 4)
6. Remove nozzle guide plate (5)
7. Open the large nozzle nut (6)
Figure 5 Removal of Gen 1 nozzle asembly
8. Remove nozzle assembly.