Programming the qs2500 – Datalogic Scanning QUICKSCAN QS2500 User Manual
Page 7
Product Reference Guide
3
Programming the QS2500
To program the QS2500, you must scan a series of programming bar
codes in the correct order. The inside back cover of this manual contains a
table of alphanumeric bar codes needed to program the various options.
To program each option:
1. Scan the Start Program bar code above the list of options (see the
table below).
2. Enter the option mode by scanning the Option bar code.
3. Find the alphanumeric entry for the option setting you want, and
scan the alphanumeric characters located in Appendix E.
4. Scan the Store Settings bar code in Appendix E.
5. Scan the Exit bar code.
NOTES
Auto-detect - the scanner can automatically detect
the interface hardware for all interfaces except Wand
Emulation.
IBM interfaces - must be selected individually
depending on the port used. Refer to
NOTES
A software utility, Configurator Express, is also available for pro-
gramming and configuring the QS2500. Refer to the Readme file
on the QS2500 product CD for additional information.
CAUTION
Disabling the Code 39 symbology will disable the scanner’s
capability to read the bar code labels in this manual.