Beep/tone/led settings – Datalogic Scanning QUICKSCAN QS2500 User Manual
Page 24
20
QS2500
Beep/Tone/LED Settings
Power-On Alert:
After power-on, the QS2500 will generate an alert signal to
indicate a successful self-test.
LED Control:
After each successful bar code reading, the LED above the
QS2500 will light up.
Beep Control:
After each successful bar code reading, the QS2500 will
beep.
Beep Loudness/Beep-Tone Frequency/Beep-Tone Duration:
You can adjust the
loudness, tone, and duration of the good-read beep.