Vertex Standard VX-264 User Manual

Page 25

VX-264 O

perating

anual

dVanced

Peration

olloW

can

The Follow Me Scan feature checks a user-assigned pri-

ority channel in addition to the channels previously pre-

programmed into a radio’s scan list. For example, if only

Channels 1, 3, and 5 (of the 8 available channels) are

designated for “Scanning”, the user may assign Channel 2

as the “user-assigned” priority channel via the Follow Me

Scan.
To activate Follow Me Scan, first select the channel you

want to designate as the “user-assigned priority chan-

nel” by positioning the CH Selector knob on the desired

“priority” channel. Next, press, (or press and hold), the

assigned PF key (the display will indicate “FM.SCAN”

briefly). Finally, rotate the CH Selector knob to the de-

sired “operating channel”.
The scanner will search the two channels (user-assigned

priority channel and operating channel) and pause when it

finds a transmission on either channel.

can

Press, (or press and hold), the assigned PF key to add/de-

lete the current channel to/from your scanning list.
To store a particular channel to your scanning list, press, (or

press and hold), the assigned PF key. If you delete a chan-

nel from your scanning list, press, (or press and hold), the

assigned PF key again.
When the scanner is paused, you may remove the channel

from the scan list temporarily by pressing, (or press and

holding), the same key.
Note 1: when store a particular channel to your scanning

list, the display indicates “Scan.Set” briefly and “ ” icon

will appear on the display.

Note 2: when delete a channel from your scanning list, the

display indicates “Scan.Skip” briefly and the “ ” icon

will disappear from the display.

Note 3: To reset your scan list to it’s original pre-pro-

grammed settings, power the transceiver off, then on us-

ing the VOL/PWR knob.