Motorola DP 1400 - Manual (Page 38)

Advanced Features
English
30
Password Lock Features
Your radio supports a 4-digit password input. If enabled, this
feature allows you to access your radio via password upon
powering up. Use the Channel Selector Knob and the two Side
Buttons to enter password (see Radio Controls on page 6):
• Channel Selector Knob positions 1 to 9 represent
numbers 1 to 9, and position 10 represents number 0.
• Side Buttons 1 and 2 represent numbers 1 and 2.
Accessing the Radio from Password
Procedure:
Power up the radio.
1 You hear a continuous tone.
2 Use the Channel Selector Knob to enter the first digit of the
password.
3 Press Side Button 1 or 2 to enter each digit of the remaining
three digits of the password. You hear a positive indicator
tone for each Side Button press.
When the second digit of the password is entered, your
radio ignores any Channel Selector Knob position change.
4 When the last digit of the four-digit password is entered,
your radio automatically checks the validity of the password.
If the password is correct:
Your radio proceeds to power up. See Powering Up the
Radio on page 4.
OR
If the password is incorrect:
You hear a continuous tone. Repeat Steps 1 to 3.
OR
After the third incorrect password, your radio enters into
locked state. A tone sounds and the LED double blinks
yellow.
Your radio enters into locked state for 15 minutes, and responds
to inputs from On/Off/Volume Control Knob.
NOTE: The radio is unable to receive any call, including
emergency calls, in locked state.

EMEA.book Page 30 Tuesday, May 14, 2013 2:00 PM