Motorola GM 340 - Manual (Page 19)

17 English
UTILITIE
S
SCAN
You can monitor several channels in order to
receive any call that is transmitted on any of
these channels. Sixteen channels can be
programmed into each scan list. Each channel
can share the same scan list or have different
scan lists assigned to them.
Once the radio’s scan operation is activated
and the radio detects a call coming through a
channel in its scan list, it switches to that
channel for you to receive the call.
STARTING OR STOPPING SCAN
You can start or stop a scan operation by using
a pre-programmed Scan button.
1. Press the Scan button to start scanning. The
scan start alert tone will sound
and the associated LED will light.
2. Press the Scan button again to stop scanning.
The scan stop alert tone will
sound and the associated LED will be
extinguished.
The LED indicator will blink green during a
scan operation. When a call on a channel is
detected the LED will stop blinking.
PRIORITY CHANNEL
A scan list may contain a priority channel. This
means that a particular channel (for example, a
commonly used channel) may be checked
more frequently than other channels in the list
during a scan operation. Priority channels are
programmed into your radio scan lists by your
dealer.
TALKBACK
If the programmable Talkback option is set, you
can respond to any calls received during the
scan operation by pressing the PTT button
before the programmed hang-time ends.
Check with your dealer for details.