Kleenmaid KED501 - Manual (Page 7)

130716
•
Packaging materials are environmentally friendly:
they can either be recycled, safely disposed of or
destroyed, without any threat to the environment.
•
To be able to do this effectively all materials are
marked accordingly.
Be careful not to damage cabinet of
the appliance with a sharp object when
removing the packaging.
Before connecting the appliance, let it
warm up to room temperature (wait for two
hours).
Ventilation slots and openings on the appliance
front and rear wall should not be obstructed.
•
Place the appliance in a well ventilated room with
a window or a built-in fan.
•
Connect the evacuation tube to the pre-prepared
opening.
•
Evacuation must not be connected to an air
duct used as a chimney for exhaust gasses of
appliances using other combustion material.
•
Appliance can either stand on its own or can be
placed on top of a washing machine of the same
dimensions - minimum width 517 mm, depth
476 mm. The surface for placing the dryer must
be clean and flat. Use supplied vacuum feet to
prevent sliding of the appliance. Washing machine
hardtop must be wooden or metallic. To conceal
the opening between the two appliances, a
decorative trim (DECPL) is available. To order call
your nearest Kleenmaid Store on 13 13 08.
7
Installation and connection
Removing wrapping
Selecting the
appropriate location of
the appliance
Installation