Design guide – Kleenmaid ZSGS420IBS User Manual
Page 4
6 mm
13 mm
19 mm
25 mm
32 mm
25 mm
19 mm Overlay
Panel
(Nominal Size)
6 mm
13 mm
19 mm
51 mm
32 mm
38 mm
44 mm
76 mm
57 mm
64 mm
70 mm
6 mm
13 mm
19 mm
Door
6060 mm From
Rear of
Refrigerator
25 mm
Refrigerator
Case
Trim
Design Guide
Top View
130° DOOR SWING
(factory setting)
Scale 1:1
IMPORTANT NOTE—FOR DISPENSER MODELS:
Dispenser models are supplied with 2 dispenser
trims, one to fit framed panels and one for
overlay panels. Dispenser trim fit to the custom
panel depends on correct panel thickness.
Framed panels must be 6 mm nominal. Overlay
panels should be constructed as shown to
accomplish a total 28 mm thickness. See pages
7 and 8 for details.
4
Frameless Cabinets: The case trim overlaps
cabinets at the top and sides. Therefore,
frameless cabinets may require filler strips to
prevent interference with cabinet door swing.
The opening must allow for filler strips.