Kleenmaid TO80S - Manual (Page 19)

17
WHAT TO DO IF...
The oven des not switch on and the programmer´s display does not light up.
- Fuses blown. Replace them.
- If the fuses blow again, too many devices are running!
- If the oven still does not work, call Kleenmaid Customer Call Centre.
The light does not work even though the oven is on.
- Probably the light bulb has blown. When the oven is cold, unscrew
the lamp cover, remove the bulb and replace it with another (switch
off at the mains first, for safety reasons).
The oven fills with smoke coming from the oven itself.
- All ovens produce smoke to a greater or lesser extent. This is
normal, especially for roasts.
You can reduce the smoke by reducing the amount of fat or liquid in
the tray and by using the oven at a lower temperature from now on.
Do not use temperatures which are higher than those shown in the
tables.
- The grill element may be dirty, with grease from a previous roast.
When the grill is switched on, this grease will be burnt and much
smoke will be created for a few minutes. Try to keep the grill clean.
The oven does not switch on and the programmer is flashing
0.00.
- Probably there has been a power cut. Adjust the time on the
programmer and repeat the switching on of the oven.
INSTALLATION
UNPACKING
Carefully remove all the elements
protecting the apparatus. The two
brackets “A” in two parts of the oven
must also be removed, as shown in
the figure.
A