Kleenmaid TO80S - Manual (Page 11)

9
The shelf and tray assembly can be
placed in any of the four levels, taking
into account its position as shown in
the figure:
1. Shelf
2. Tray
First insert the tray carrier shelf
1 in the position shown in the
figure.
REMOVING ROASTING TRAYS
1
2
3
4
1
1
2
2
Then insert tray 2 in the upper part of
the shelf 1 in the position shown in the
figure.
Fit the assembly into the oven.
To remove the trays once cooking has
ended, pull the tray carrier shelf fully
outwards and then either:
1. Remove the tray from the shelf.
2. Remove the entire assembly by slightly
lifting the shelf over the stops that prevent
it from falling.