Kleenmaid OCCTWB - Manual (Page 7)

P R E - A S S E M B L Y 7 7
Standard Phillips-head screwdriver.
Adjustable spanner
(open-end shifter).
TOOLS YOU WILL NEED
Description Qty
Trolley side panel – right 1
Trolley side panel – left 1
Trolley rear panel 1
Castor seat
– 1 x left rear, 1 x left front, 1 x right rear, 1 x right front 4
Castors 4
Bottom shelf 1
Trolley bracket – front 1
Gas cylinder pull-out tray 1
Body support bracket 2
Trolley separation panel 1
Doors 2
Body assembly 1
Hardware pack 1
Hot plate 1
Pot support 1
Door hinge
– 1 x top left, 1 x top right 2
Door guide 1
Grease tray 1
Grease drain tube 1
Towel rack 1
Spice rack 1
CARTON CONTENTS
Before attempting to assemble your barbecue, check that all the
necessary parts have been included using the parts list opposite.
Inspect barbecue and trolley parts as you proceed.
Contact your place of purchase for assistance regarding
replacement of any damaged or missing parts. Supplier contact
details are on the back cover of the instruction manual.
Do not assemble or operate a barbecue that appears damaged.
Check that the barbecue supplied is correct for the gas type
being used. There is a label on the side panel of the barbecue
above the gas connection. Barbecues for use with gas cylinders
are labelled
‘Universal LPG’. Barbecues for use with natural gas
are labelled ‘Natural Gas’.
CHECK BARBECUE FOR ANY DAMAGE
While it is possible for one person to assemble the barbecue,
we recommend asking for the assistance of another person when
manoeuvring some of the larger or heavier pieces.
GENERAL
1. Flatten cardboard packaging and use this as a protective
work surface to assemble upon.
2. Some protective coating may need to be removed from
components prior to assembly.
3. Tighten screws and nuts unless otherwise specified.
4. Pre-screwing of connection points for securing the side
shelves will assist in securing shelves smoothly.
ASSEMBLY TIPS