Kleenmaid OCCTWB User Manual
Page 10
A S
S E M B L Y
10
10
Phillips-head screw
1
/
4
" x 1
3
/
16
"
Qty. 4
Attach barbecue body to trolley.
NOTE: Release regulator from underneath the
body by cutting the cable tie. Feed regulator
through the hole in the trolley separation panel.
After assembly is complete close the hatch
(located underneath) around the gas hose.
Refer to page 13 for installation of grease tray and grease
tube.
8
Phillips-head screw
3
/
16
" x
1
/
4
"
Qty: 4
Phillips-head screw
3
/
16
" x
3
/
8
"
Qty: 4
Attach top right and left door hinges / doors. Insert the bottom
door hinge pin into the lower door hinge bracket holes.
Depress the spring loaded top door hinge pin and line up
with the top hinge bracket holes, and release the pin.
Attach door handles and towel rack to the inside panel
of the left door.
7
A
B
A
A
B
Towel rack
Locate spice rack into
slots inside left door
Note: Change of screws for securing Towel Rack:
4 x self tapping screws have been attached to original hardware
pack to replace original 4 x metal threaded 3/16” screws. Please
use self tappers to secure towel rack. Original screws may still
be enclosed in hardware pack and will remain after assembly.