Kleenmaid ICK68X - Manual (Page 25)

25
After all the steps have been displayed, the memory
program starts. The hotplate heats up.
The
¢ Ăhotplate indicator and the 1 timer function
indicator are constantly lit.
The current setting is displayed in the hotplate
indicator. The duration of the whole cooking event
counts down in the timer indicator.
You can call up the remaining heat settings and
the respective cooking times while the memory
program is running:
Touch the - and + timer function symbols
at the same time.
Touch the + symbol, the current heat setting and
cooking time is displayed. You can now call up all
the remaining heat settings and the respective
cooking times using the + symbol.
When the memory program has finished, the hotplate
switches off. A signal sounds. 00 flashes in the timer
indicator. The 1 hotplate indicator flashes. 0 lights
up in the hotplate indicator.
Touch the + or - symbol for the required hotplate.
The hotplate display flashes. Touch the + or - symbol
again. The hotplate switches off.
If during the memory programme the hotplates are
adjusted to a power level, the memory programme will
finish and the hotplate switch off.
Starting the memory
function
Memory end time
Ending the memory
prematurely
Indicator lights