Kleenmaid ICK68X - Manual (Page 22)

22
When the cooking time has ended, the hotplate
switches off. A 0 appears in the heat setting indicator.
A signal sounds. 00 flashes in the timer indicator and
the 1 indicator flashes.
Touch the - and + switches of the Timer functions
at the same time. You should do this several times
until the 1 symbol flashes. Now you will be able
to set the time with the -
or + switches.
Touch the - and + symbols repeatedly and at
the same time until the required 1 indicator flashes.
Set the timer function to 00 using the - symbol.
The indicator goes out after a few seconds.
If you would like to call up the remaining cooking time
for a hotplate: Touch the - and + symbols repeatedly
and at the same time until the 1 indicator for
the relevant hotplate flashes. The cooking time
is displayed for 5 seconds.
You can set a time of up to 99 minutes.
Automatic time limit can also be activated using
the timer function.
The timer function is no longer active after
a power cut.
You can use the timer on your cooker to set a time
of up to 99 minutes. It runs independently of all
other settings.
1.
Touch the - and + symbols repeatedly and
at the same time until the a indicator for the
cooking timer flashes. 00 flashes in
the timer indicator.
2. Touch the - or + symbol.
The default value appears.
+ symbol: 10 minutes
- symbol: 05 minutes
3. Set the time using the - and + symbols.
The time disappears after a few seconds.
The shortest time set with the timer is displayed.
When the cooking time has
elapsed
Changing prematurely
Cancelling prematurely
Notes
Cooking timer
Setting procedure