Kawai CL26 - Manual (Page 36)

36
Ap
p
e
nd
ix
„ MIDI IN/OUT jacks
These jacks are located on the underside of the instrument on the left hand side, and used to connect the CL26 digital piano to
external MIDI devices, such as a sound module, or a computer with a MIDI interface.
Connect the instrument’s MIDI IN jack to the external device’s MIDI OUT jack, and the instrument’s MIDI OUT jack to the external
device’s MIDI IN jack.
External
MIDI Device
„ Troubleshooting
Problem Possible Cause and Solution Page no.
Po
w
e
r
The instrument does not turn on.
Check that the AC power adaptor is firmly attached to the instrument,
and connected to an AC outlet.
p. 11
Sound
The instrument is turned on, however
no sound is produced when the keys
are played.
Check that the VOLUME knob is not set to the lowest position.
Check that a pair of headphones (or headphone adaptor plug) are not
connected to the PHONES jacks.
Check that the ‘Local Control’ MIDI setting is set to ‘On’.
p. 11
p. 11
p. 29
The sound distorts when playing at
very loud volume levels.
Check that the VOLUME knob is set to an appropriate level, reducing
the volume if excessive distortion is heard.
p. 11
Pe
d
a
ls
The pedal is unreliable or does not
function at all.
Check that the pedal cable is firmly connected to the instrument. p. 11
Connecting to Other Devices
Front
Back
Underside