Kawai CA17 - Manual (Page 30)

30
Re
cor
de
r
Recorder
The CA17 digital piano allows up to 3 different songs to be recorded, stored in internal memory, and played
back at the touch of a button.
1
Recording a song
1. Entering song recorder mode
Press the REC button.
The LED indicator for the REC button will start to flash, to
indicate that the piano is in recording standby mode.
2. Selecting a song memory
(Please refer to page 15 Operation Guide RECORDER.)
Press and hold the REC button, then press one of the lowest three white keys to select the desired song memory.
* Selecting a song memory that has already been used to record a song will automatically erase the previously recorded song.
3. Starting the song recorder
Press a key on the keyboard.
The LED indicators for the REC and PLAY/STOP buttons will
turn on, and recording will start.
* Recording can also be started by pressing the PLAY/STOP button, allowing
a rest period or empty bar to be inserted at the beginning of the song.
4. Stopping the song recorder
Press the PLAY/STOP button.
The LED indicators for the PLAY/STOP and REC buttons will flash briefly, and the song will be stored in internal memory.
* Do not turn the power off while the song is saving to memory.
* The maximum recording capacity is approximately 10,000 notes, with button and pedal presses also counted as some notes.
* If the maximum recording capacity is reached during recording, the recorder will stop automatically.
* Recorder songs will remain in memory after the power is turned off.