Kawai CA97 - Manual (Page 87)

87
Set
tings
4
Damper Noise
When the damper pedal of an acoustic piano is pressed and released, it is often possible to hear the sound of the
damper head touching and releasing the strings.
The CA97/CA67 digital piano reproduces this sound, with the Damper Noise setting allowing the volume of this
sound to be adjusted. The speed at which the damper pedal is pressed will also influence the prominence of the
damper noise, with fast pedalling creating a very pronounced sound.
* This Virtual Technician setting will affect acoustic piano sounds only.
1. Selecting the Damper Noise setting
After entering the Virtual Technician menu (page 80):
Press the d or c buttons to select the Damper Noise setting.
2. Adjusting the Damper Noise volume
Press the e or f buttons to increase or decrease the volume of
the Damper Noise setting.
* The Damper Noise volume can be adjusted within the range of
Off, 1~10, with higher values resulting in a more pronounced noise.
* To reset the Damper Noise setting to the default value, press the
e and f buttons simultaneously.
* Any changes made to the Damper Noise setting will remain until the
power is turned off.
* Preferred Damper Noise settings can be stored to the sound’s memory,
or a Registration memory for convenient recall. Please refer to pages
81 and 33 for more information.
3. Exiting the Damper Noise setting
Press the FUNCTION button (BACK) to exit the Damper Noise
setting and return to the Function Menus screen.