Disconnecting the qs2 hard drive – Kanguru QS2 User Manual
Page 8
Disconnecting the QS2 Hard Drive:
USB 2.0/Firewire:
Windows ME/2000/XP/Vista/7 users: Click on the green Remove Hardware
icon on the right side of the taskbar and select the USB Mass Storage Device to
safely remove the drive.
Notice: If you do not properly remove the drive from your system, then you may
have to reboot your computer in order for the drive to be recognized again.
Mac: When removing the drive from your Mac, close all windows and quit all
applications that are stored on the QS2 and drag the drive’s icon to the
Trash/Eject to remove the drive from your computer.
Do not unplug the QS2 from your computer while copying files to or from
the drive or while applications or files stored on the drive are in use. Doing
so may result in data loss or damage to the drive.
eSATA:
Windows 2000 / XP / Vista
1. Right click on the My Computer icon and click properties
2. Click on the Hardware tab and click on the Device Manager button
3. Double click on Disk Drives
4. Right click on the device labeled SCSI Disk and select Uninstall
5. When the confirm dialog appears, click ‘OK’ to remove the device
6. It is now safe to unplug the device from your computer