Kanguru QS Slim DVDRW Quick Start - Manual (Page 9)

9
2.2 Mac Operation
Setting up your Kanguru QS Slim
Mac OS X has a built-in driver to support the Kanguru QS Slim. Simply plug in the Kanguru QS Slim
DVDRW to your computer and your operating system will automatically detect the new hardware
and install the appropriate driver. A CD/DVD icon will appear on your desktop when a CD or DVD
is inserted into the drive.
Note: The CD/DVD icon will only appear on your desktop when a CD or DVD is inserted in the
drive. You will not see a CD/DVD icon on your desktop if the QS Slim is connected but there is no
CD or DVD present.
Burning CDs/DVDs
The Kanguru QS Slim does not come bundled with Mac compatible software. However there are
many free, 3rd party burning programs available for Mac. We recommend using Burn! burning
software with the Kanguru QS Slim.
Removing your Kanguru QS Slim
To properly remove the device from your computer, you need to first eject any disc in the drive.
Your system may freeze up or give you an error message if you remove the device without properly
stopping it first.
To remove your Kanguru QS Slim, click and drag the CD/DVD icon from your desktop to the
trashcan . This will safely eject the disc from your system. Once the disc has been removed you can
safely disconnect the USB Cable. If there is no disc in drive, there won’t be a CD/DVD icon on your
desktop. In this case you can simply disconnect the USB cable.
Mac Operation