JLCooper MLA-1 - Manual (Page 3)

MLA-1 / MLA-10
Installation/Operations Manual
MLA-1
MLA-10
•
The MLA-1 is designed as a
surface mountable unit. This may be
inside of a wall box. It measures 6.7"
by 6.2" by .8".
•
The MLA-10 is designed as a
rack-mountable unit. It occupies a
single height of rack and is less than
4 inches deep.
•
The MLA-1 is normally
powered remotely from a MLA-10,
but may be ordered from the factory
for wall-transformer power.
•
The MLA-10 is powered by a
UL-approved wall transformer and
has a front panel power switch and
power indicator.
•
Since this unit is normally
mounted inside a wall box, no LEDs
are included.
•
This unit has eight front panel
LEDs that indicate MIDI activity on
each of the 4 MIDI inputs and 4 MIDI
outputs.
•
MIDI connection is made via a
24 position terminal strip. Normally,
the installer would mount the MIDI
DIN connectors on a wall plate, and
wire these to the terminal strip.
•
On the rear panel are 4 MIDI
input DIN connectors and 4 MIDI
output DIN connectors.
•
The unit has another 24-
position wire terminal strip for
connection of the multi-conductor
long cable.
•
On the rear panel is a 24-
position wire terminal strip for
connection of the multi-pair long
cable. This is a plug-in type, so that
the unit may be removed without
disconnection of individual wires.
3