JLCooper gBOX - Manual (Page 8)

8
Ethernet Interface
When MCS-Ethernet Interface is installed, the rear panel DIP
switches on the left side set the IP Address and behavior of the
gBOX.
The rear panel DIP switches on the right side are currently not used
and are ignored.
Mode Selection
When DIP switch 5 on the left side is in the Off position, the
gBOX behaves as a server. That is, the gBOX waits for a device
such as a host computer or client gBOX to establish a connection
to it. Conversely, when DIP switch 5 is in the On position, the
gBOX behaves as a client. That is, the gBOX attempts to connect
to a server device such as a server gBOX to establish a connection
to it.
SW5 Mode
Off Server
On Client
Mode Selection of gBOX
Figure 1
CONFIGURATION
1 2 3 4 5 6
O
N
1 2 3 4 5 6
O
N