JLCooper ES-4/100 MIDI - Manual (Page 7)

7
1. Faders
Prominently featured on the top panel of the unit are four or
eight 100mm, touch sensitive, motorized faders. Because
the faders are motorized, the faders can respond to updates
from your system or software package.
2. Fader Buttons and LEDs
Above the each fader is a button with a corresponding
LED. These buttons and LEDs provide for control various
functions such as SELECT, SOLO, MUTE and AUXiliary.
These buttons are momentary acting. Your system or
computer software controls the LEDs.
3. Function Select Buttons
To the left side are four buttons, which select the
functionality of the buttons above the faders.
4. Inc / Dec Buttons
Changes the fader bank. The ES-4/100 and ES-8/100
internally keeps track of 8 fader channels. However, since
the ES-4/100 only has 4 physical faders, the INC/DEC
buttons allow the user to select the four channels that the
unit controls at any given time. DEC selects channels 1,2,3
& 4, which is the default after power is applied, while INC
selects channels 5, 6, 7 & 8. These buttons in the ES-8/100
send Bank Up and Band Down commands
System Requirements
Any synthesizer or computer with a MIDI interface