JLCooper ES-4/100 MIDI - Manual (Page 10)

10
Function Select
The Fader buttons can produce various actions in your application.
Typically, the Fader buttons can be set to perform a SELECT,
SOLO, MUTE or any other command that your software package
might use.
The SELECT function normally performs a track select or track
arm. Pressing this button selects the track for recording or editing.
The MUTE function is straightforward. This usually mutes the
selected track during playback or record.
The SOLO function typically mutes all other tracks except the
selected tracks.
The AUX function is dependent on the software package you are
using. The software manufacturer can use this button to
implement any function. Please consult your documentation.
Applications
Notes about MIDI:
For total studio control, connect the MIDI input and output of the
ES-4/100 and ES-8/100 to a MIDI patch bay or a computer
interface with built-in patch bay.
For direct control of signal processors, synthesizers, or other MIDI
devices connect the MIDI output of ES-4/100 and ES-8/100 to the
MIDI input of the device that you want to control.
For sequencer automation, connect the MIDI output of ES-4/100
and ES-8/100 to the MIDI input of the sequencer or computer
interface.
Connect the MIDI output of the sequencer or computer interface to
the MIDI input of ES-4/100 and ES-8/100.