JLCooper ES-4/100 MIDI - Manual (Page 14)

14
Note: Since there are only four physical faders, reception
of a fader position command for a fader not selected on the
current bank will be stored internally until the operator has
made a bank change.
Touch
When a fader knob is touched or released, the ES-4/100 and ES-
8/100 sends the following message:
Bnh 4Ah 0xxxxxxxx
n 0 to 7, corresponding to faders 1 thru 8
xxxxxxx 7Fh when the fader is touched and
00h when the fader is released
Buttons/LEDs:
The function select buttons determine the behavior of the buttons
above the faders. In the ES-4/100 and ES-8/100, there are 4
buttons that allow the user to directly select the function for the
buttons above the faders. An LED indicates the function selected
for the buttons above the faders.
When a button above the fader is touched or released, the ES-4/100
and ES-8/100 sends the following message:
Bnh 0xxxxxxx 0yyyyyyy
n 0 to 7, corresponding to faders 1 thru 8
xxxxxxx button function (see table on next page)
yyyyyyy 7Fh when the button is pressed and
00h when the button is released