JLCooper CX Eclipse User Manual

Page 12

contain current information on drivers, applications and
troubleshooting.

Below are listed some possible issues and solutions.

Issue

Can’t connect to Eclipse CX with the host software through an
Ethernet hub or switch.

Cause

Eclipse CX not properly connected to ethernet hub or switch.

Solution

Connect Eclipse CX to ethernet hub or switch with a straight
through cable not a crossover cable.

Issue

Can’t connect to Eclipse CX directly to my computer with the host
software.

Cause

Eclipse CX not properly connected to PC.

Solution

Connect Eclipse CX to ethernet port on your PC with a crossover
cable not a straight through cable.

Issue

Can’t connect to Eclipse CX with the host software.

Cause

Ethernet settings on Eclipse CX and computer are not compatible.

Solution

Set the ethernet settings on your Eclipse CX and PC to work
together.

For example, with the Eclipse CX factory defaults of:

IP Address

192.168.254.101

Subnet Mask

255.255.255.0

Gateway 192.168.254.198

Set your PC ethernet settings to: