JLCooper KeyShot - Manual (Page 5)

5
Unpacking
When you receive your KeyShot or RackShot, you should receive
the following items:
· KeyShot or RackShot
· This Users Manual
· Power supply appropriate for your location
If you have also purchased any optional MCS-Interface cards with
the KeyShot or RackShot, the card may be preinstalled.
Please take a moment to register your product at:
http://www.jlcooper.com
This will allow us to notify you of important updates and changes
to software or features.
Setup
An interface card, which communicates with the host or a
controlled device (VTR, switcher, etc), must be installed.
To install the interface card:
1. Unplug the power cable from the unit.
2. Remove 2 screws attaching the blank plate to the side of
the unit.
3. Slide Interface Card into unit.
4. Replace 2 screws that secure card to unit.