JLCooper KeyShot - Manual (Page 19)

19
Power
The KeyShot and RackShot requires a 5 volt DC supply capable of
delivering at least 1 amp. The unit comes with a power supply
appropriate for the country in which the unit was sold. If you need
a power supply specific to your location, please contact your local
distributor or JLCooper Electronics.
Location JLCooper Part Number
North America 561027
Europe 561027
Table 2: JLCooper approved Power
Supplies
Warning: Using a power supply other than the units specified in
the above table can result in damage to the KeyShot and/or other
equipment which is not covered by the JLCooper Factory
Warranty.