Datalogic Scanning DS6500-100-015 - Manual (Page 16)

DS6500 ETHERNET MODEL
SOFTWARE FEATURES ENVIRONMENTAL FEATURES
Interleaved 2/5 Readable Codes
Code 39 standard
Operating
Temperature
0° to +40 °C (+32 to +104 °F)
Codabar
Code 128
Storage
Temperature
-20° to +70 °C (-4° to +158 °F)
EAN 128 Humidity 90% non condensing
Code 93 (Standard & Full ASCII) Ambient Light
EAN/UPC (including Add-on 2 Immunity
3500 lux
And Add-on 5) Vibration Resistance 14 mm @ 2 to 10 Hz
Code Selection IEC 68-2-6 test FC 1.5 mm @ 13 to 55 Hz Up to 10 codes during one
reading phase
2 hours on each axis 2 g @ 70 to 200 Hz
Headers and Shock Resistance
Terminators
Up to 128-byte headers and
128-byte terminators
IEC 68-2-27 test EA
On Line, Automatic, Test, 3 shocks on each axis
30 g; 11 ms
Operating Modes
PackTrack™ Protection Class IP50
Config. Mode Genius™ utility program PHYSICAL FEATURES
Std Models Oscill. Mirror
Dimensions mm
(inch) 110x113x99
(4.33x4.45x3.9) 113x180x104.5
(4.45x7.08x4.11)
Parameter Storage Non-volatile internal FLASH
Weight 1.5 kg (3.3 lb) 2.0 kg (4.4 lb)
Accessories:
Name Description Part Number
CAB-6011 Cable to C-BOX100 1 m 93A051221
CAB-6012 Cable to C-BOX100 2 m 93A051222
CAB-6015 Cable to C-BOX100 5 m 93A051223
C-BOX 100 Passive connection box 93ACC1510
INT-30 20 mA C.L. interface board for C-BOX 100 93A151022
GFC-60 90° mirror 93A201100
GFC-600 90° mirror close distance 93A201102
PWR-120 Power unit 110/230 V AC - 24 V DC 93ACC1530
BTK-6000 Terminator kit (5 pcs) 93ACC1710
PG6002 Single unit power supply – US 93ACC1718
PG6001 Single unit power supply – UK 93ACC1719
PG6000 Single unit power supply – EU 93ACC1720
FBK-6000 Fast bracket kit (2 pcs) 93ACC1721
US-60 Mounting bracket kit (5 pcs) for multisided stations 890001020
MEP-542 Photocell kit – PNP 93ACC1727
MEP-543 Photocell kit – NPN 93ACC1728
OEK-2 Optical encoder (10 m cable + spring) 93ACC1770
OEK-1 Optical encoder kit + 10 m cable 93ACC1600
Electrical Connections:
The DS6500 Ethernet reader provides a 26-pin male D-sub connector for connection to power supply and
input/output signals.
An Ethernet connector is used for connection to the remote Host (for ex. Remote PC connected via Internet),
while a local Lonworks 9-pin female connector connects the Ethernet master to the first slave reader of the
system.
The details of the connector pins are indicated in the following table:
14