Jetway Computer NC96 - Manual (Page 38)

33
Press Enter to set certain values for the following three items: CPUFAN Smart Mode
and SYSFAN1 Smart Mode to set respectively for value in Full-Speed Temp.; Idle
Temp. and Idle-Speed Duty .
+5V OUT/+12V OUT/Vcc3V OUT/ CPU Temperature/ System Temperature/
/CPUFAN/ SYSFAN1/SYSFAN2 Speed/ Vcore/ /NB1.05V/5VSB/VDIMM/
+5V/+12V/5 /Vcc3V/3VSB/Vbat /
This will show the CPU/FAN/System voltage chart and FAN Speed, etc.
3-11 Miscellaneous Control
Spread Spectrum
The optional settings are: Enabled; Disabled.
Linear PCIEX Clock
The optional settings are from 100 to 200.
DRAM Clock at Next Boot
This item allows you to set DRAM clock. The optional settings are: Auto; 667MHz;
800MHz
Host/PCI Clock at Next Boot