Jetway Computer NF98 - Manual (Page 34)

29
PCI Express Compliance Mode
Use this item to enable or disable PCI Express compliance testing mode.
► South Bridge
SMBus Controller
The optional settings are: [Enabled]; [Disabled].
GbE Controller
The optional settings are: [Enabled]; [Disabled].
Wake on Lan from S5
Use this item to enable or disable GbE control PME in S5.
Restore AC Power Loss
Use this item to specify what state to go to when power is re-applied after a power
failure (G3 State). The optional settings are: [Power Off]; [Power On]; [Last State].
SLP_S4 Assertion Stretch Enable
The optional settings are: [Enabled]; [Disabled].
Azalia HD Audio
The optional settings are: [Enabled]; [Disabled].
Azalia Internal HDMI Codec
Use this item to enable or disable internal HDMI codec for Azalia.
High Precision Timer
The optional settings are: [Enabled]; [Disabled].
► PCI Express Event Timer Configuration
Press [Enter] to further setting PCI Express Event Timer configuration.
► USB Configuration
Press [Enter] to further setting USB port configuration.
► ME subsystem
ME Subsystem /End of Post Message