Jetway Computer NF98 - Manual (Page 32)

27
► SmartFan Configuration
CPUFAN Smart Mode
When set as [Enabled], the following sub-items shall appear:
CPUFAN Full Speed Temp
Use this item to set CPUFAN1 full speed temp. CPU FAN will run at full speed
when above this temperature.
CPUFAN Idle Temp
Use this item to set CPU idle speed temperature setting. CPU FAN will run at idle
speed when below this temperature.
CPUFAN Stop Temp
Use this item to set CPU stop temp. CPU FAN will stop when below this
temperature.
SYSFAN1 Smart Mode
Use to set sysfan1 smart mode.
► WatchDog Configuration
WatchDog Timer Control
Use this item to enable or disable WatchDog Timer Control. When set as Enabled,
the following sub-items shall appear:
WatchDog Timer Value
User can set a value in the range of 4 to 255.
WatchDog Timer Unit
The optional settings are: [Second];[Minute].
► Shutdown Temperature
Use this item to select system shutdown temperature.
► Serial Port Console Redirection
Console Redirection