Jetway Computer NF98 - Manual (Page 30)

25
► SATA Configuration
SATA Mode
The optional settings are: [Disabled]; [IDE Mode]; [AHCI Mode]; [RAID Mode].
Serial-ATA Controller 0
The optional settings are: [Disabled]; [Enhanced]; [Compatible].
Serial-ATA Controller 1
The optional settings are: [Disabled]; [Enhanced].
► Intel IGD SWSCI OpRegion
IGD-Boot Type
Use this item to select the video device which will be activated during POST. This
has no effect if external graphics present.
LCD Panel Type
Use this item to select the LCD panel used by internal graphics device.
Panel Scaling
Use this item to select the LCD panel scaling option used by the internal graphics
device.
GFX Low Power Mode
The optional settings: [Enabled]; [Disabled]. This option is only applicable for SFF.
► USB Configuration
Legacy USB Support
The optional settings are: [Auto];[Disabled]; [Enabled].
EHCI Hand-off
The optional settings are: [Disabled]; [Enabled].
USB Transfer time-out
Use this item to set the time-out value for control, bulk, and interrupt transfers.
Device reset time-out