Jetway Computer NF83 - Manual (Page 38)

33
Use this item to select primary video device that BIOS will use to for output.
The optional settings are: [Internal VGA]; [External VGA].
Integrated Graphics
Use this item to select integrated graphics controller.
The optional settings are: [Auto]; [Disabled]; [Force].
PSPP Policy
Use this item to select PCIE speed power policy.
The optional settings are: [Disabled]; [Performance]; [Balanced-High];
[Balanced-Low]; [Power-Saving].
Memory Clock
Use this item to select memory clock.
The optional settings are: [Auto]; [800MHz]; [1066MHz]; [1333MHz]].
Memory Hole Remapping
The optional settings are: [Enabled]; [Disabled].
Bank Interleaving
The optional settings are: [Enabled]; [Disabled].
Channel Interleaving
The optional settings are: [Enabled]; [Disabled].
Memory Clear
The optional settings are: [Enabled]; [Disabled].
Onboard Lan1 Device
Use this item to enable or disable onboard LAN1 device.
The optional settings are: [Enabled]; [Disabled].
Onboard Lan2 Device
Use this item to enable or disable onboard LAN2 device.
The optional settings are: [Enabled]; [Disabled].