Jetway Computer NF83 - Manual (Page 31)

26
Link Training Timeout(uS)
Use this item to define number of microseconds software will wait before polling
‘Link Training’ bit in link status register. Value range from 10 to 1000 uS.
Unpopulated Links
The optional settings are: [Keep Link On]; [Disable Link].
In order to save power, software will disable unpopulated PCI Express links if this
option is set as ‘Disable Link’.
► ACPI Settings
Press [Enter] to make settings for the following sub-items:
ACPI Settings:
ACPI Sleep State
Use this item to select the highest ACPI sleep state the system will enter when the
suspend button is pressed.
The optional settings are: [Suspend Disabled]; [S3 only(Suspend to RAM)].
Lock Legacy Resources
The optional settings: [Disabled]; [Enabled].
Use this item to enable or disable lock of legacy resources.
► Wakeup Function Settings
Press [Enter] to make settings for the following sub-items:
Wake System with Fixed Time
Use this item to enable or disable system wake on alarm event. When set as
[Enabled], system will wake on the hour/min/sec specified.
The optional settings: [Disabled]; [Enabled].
CIR Wakeup
Use this item to enable or disable CIR wakeup. This function is only supported
when ERP function is disabled.
The optional settings: [Disabled]; [Enabled].
PS2 KB/MS Wakeup
Use this item to enable or disable PS2 KB/MS wakeup function. This function is
only supported when ERP function is disabled.
The optional settings: [Disabled]; [Enabled].
USB S3/S4 Wakeup
Use this item to enable or disable USB S3/S4 wakeup. This function is only