Jetway Computer NF82 User Manual

Page 36

USB Controller
The optional settings are: [Enabled]; [Disabled].
Restore AC Power Loss
Use this item to select AC power state when power is re-applied after a power
failure. The optional settings are: [Disabled]; [Power On]; [Last State].

► North Bridge

Press [Enter] to make settings for the following sub-items:
Graphics Configuration
Primary Video Device
The optional settings are: [Internal VGA]; [External VGA].
Integrated Graphics
The optional settings are: [Auto]; [Disabled]; [Force].
PSPP Policy
The optional settings are: [Disabled]; [Performance]; [Balanced-High];
[Balanced-Low]; [Power-Saving].

Memory Clock
Use this item to select memory clock.
Memory Hole Remapping
The optional settings are: [Enabled]; [Disabled].
Bank Interleaving
The optional settings are: [Enabled]; [Disabled].
Channel Interleaving
The optional settings are: [Enabled]; [Disabled].
Memory Clear
The optional settings are: [Enabled]; [Disabled].
Onboard Lan1 Device
Use this item to enable or disable onboard LAN1 device.
Onboard Lan2 Device
Use this item to enable or disable onboard LAN2 device.