Jetway Computer NF82 - Manual (Page 33)

28
a hub port the delay is taken from hub descriptor. The optional settings: [Auto];
[Manual].Select [Manual] you can set value for the following sub-item: Device
Power-up delay in seconds, the delay range in from 1 to 40 seconds, in one
second increments.
► Acoustic Management Configuration
Press [Enter] to enable or disable Automatic Acoustic Management function.
► Second Super IO Configuration
► COM3 Port Configuration /COM4 Port Configuration / COM5 Port
Configuration /COM6 Port Configuration
Serial Port
Use this item to enable or Disable serial port.
Change Settings
Use this item to select an optimal setting for super IO device.
Serial Port Mode Select
Use this item to set serial port as [RS232] or [RS422/485].
*Note: Serial Port Mode Select function is only optional for COM6 port.
► Super I/O Configuration
Press [Enter] to make settings for the following sub-items:
Super IO Configuration
► COM1 Port Configuration
Press [Enter] to make settings for the following items:
Serial Port
Use this item to enable or disable serial port.
Change Settings
Use this item to select an optimal setting for super IO device.
► COM2 Port Configuration
Press [Enter] to make settings for the following sub-items:
Serial Port
Use this item to enable or disable serial port.
Change Settings
Use this item to select an optimal setting for super IO device.