Jetway Computer NF82 - Manual (Page 31)

26
► Wakeup Function Settings
Press [Enter] to make settings for the following sub-items:
Wake System with Fixed Time
Use this item to enable or disable system wake on alarm event. When set as
[Enabled], system will wake on the hour/min/sec specified.
CIR Wakeup
Use this item to enable or disable CIR wakeup. This function is only supported
when ERP function is disabled.
PS2 KB/MS Wakeup
Use this item to enable or disable PS2 KB/MS wakeup function. This function is
only supported when ERP function is disabled.
USB S3/S4 Wakeup
Use this item to enable or disable USB S3/S4 wakeup. This function is only
supported when ERP function is disabled.
► ASMedia SATA3.0 Configuration
Press [Enter] to make settings for SATA mode.
ASMedia Operation:
SATA Mode
The optional settings are: [IDE Mode];[AHCI Mode];[RAID Mode].
► Trusted Computing
Press [Enter] to enable or disable TPM support.
► CPU Configuration
Press [Enter] to make settings for the following sub-items:
PSS Support
Use this item to enable or disable the generation of ACPI_PPC, _PSS, and _PCT
objects.
PSTATE Adjustment
Use this item to adjust startup P-state level. The setting level ranges from [Psate0]
~ [PState7].
PPC Adjustment
Use this item to adjust _PPC object. The setting level ranges from [Psate0] ~
[PState5].