Delta Electronics SMT Power Inductor MPL13X User Manual
Smt power inductor (molding type), Mpl13x type, Mechanical dimension
SMT Power Inductor (MOLDING TYPE)
MPL13X Type
Mechanical Dimension:
DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG)
252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL: 886-3-3591968; FAX: 886-3-3591991
http://www.deltaww.com
143
UNIT : mm/inch
A = 14.00 / 0.551 Max.
B = 12.90 / 0.508 Max.
7.8/0.307
1
4
.2
0
/0
.5
6
0
5.20/0.205
B
A
2.54 / 0.100
D
C
1. Isat is the DC current which cause the inductance drop approximately 30% of its nominal inductance without current.
O
2. Ir is the DC current which cause the surface temperature of the part increase approximately than 40
C.
RECOMMENDED PAD PATTERNS
Applications
Features
Notebook/Desktop/Server/Video Card applications.
High current POL converters.
Low profile, high current power supplies.
Battery powered devices.
Ideal for power source circuits, DC-DC converter.
DC-AC inverters inductor application.
RoHS compliant.
Low profile, high current SMD type.
Frequency range up to 1MHz.
Lowest DCR/ H, in this package size.
Low buzz noise due to its gap-less structure.
Electrical Characteristics:
At 25
: 100KHz, 0.25V
o
C
PART NO.
(uH)
L
o
1
DCR
(m ) TYP.
DCR
(m ) MAX.
1
Isat
(Adc)
2
Ir
(Adc)
Dimension "D"
mm / inch
MAX
Dimension "C"
mm / inch
0.5 /
0.02
MPL133-R68
0.68
20%
1.80
2.30
49
28
4.0 / 0.157
3.5 / 0.138
MPL133-1R0
1.00
20%
3.30
3.60
40
24
2.6 / 0.102
3.5 / 0.138
MPL135-0R4
0.40
20%
0.72
0.85
65
42
4.7 / 0.185
5.0 / 0.197
MPL135-R47
0.47
20%
0.85
1.10
65
42
4.7 / 0.185
5.0 / 0.197
MPL135-R56
0.56
20%
1.30
1.50
55
38
4.7 / 0.185
5.0 / 0.197
MPL136-1R0
1.00
20%
1.90
2.30
49
32
4.2 / 0.165
6.5 / 0.256
MPL136-1R5
1.50
20%
2.50
2.80
45
28
4.2 / 0.165
6.5 / 0.256
MPL136-1R8
1.80
20%
2.80
3.20
41
24
4.2 / 0.165
6.5 / 0.256
MPL136-2R2
2.20
20%
3.50
4.20
40
22
4.0 / 0.157
6.5 / 0.256
MPL136-3R3
3.30
20%
3.90
4.50
35
19
4.0 / 0.157
6.5 / 0.256