James Loudspeaker PL SERIES LCR (For shipped after July 15, 2010) User Manual
Page 5
Page 5
Step 11 – Place the TV bracket over the
speaker bracket, aligning the screw
holes, and reinsert the screw to now
hold the speaker bracket and the wall
mounting bracket.
Step 12 – Install additional (top) screws
in this bracket.
Step 13 – Repeat these steps for the
other bracket. NOTE - If you have a 1
piece TV wall mount, then you will have
to remove both screws that hold the
speaker brackets and align and install
the bottom screws at the same time,
Step 14 – Check that all the screws in
both brackets and on the rear of the TV
are tight.
Step 15 – Hang the TV on the wall
bracket.
NOTE: We have not discussed when the
speaker wires should be attached – this
depends on the type of installation. We
leave it up to you to make the choice of
connecting the wires while installing the
brackets or after.
Enjoy your new TV!
Rev PL-V2-A