James Loudspeaker M1000 Memory reset procedure User Manual
James Loudspeaker Acoustics

M1000 Memory reset procedure
- Press and hold both up and down arrow buttons
- Turn on M1000 power switch
- Wait for 0.5 to 1 seconds – the “Ω” symbol will be on the display (see below)
- Release both up and down arrow buttons
- Press up arrow button
- “ID Number” will be displayed (see below)
- Wait while the amp resets
- The ID Number will be displayed then Reset is completed. (see below)
You may turn the amp off now and restart.