James Loudspeaker PL SERIES LCR (For shipped after July 15, 2010) User Manual
Page 3
Page 3
Step 5 – Loosely install the BOTTOM
bracket screw into the TV. You will be
sliding the bracket down for some other
adjustments so if the top bracket screw
is installed, the bracket will not move
down enough to allow the next step. DO
NOT install the top bracket screw yet.
Step 6 – Repeat with the second
bracket.
Step 7 – Slide the speaker away from
the TV so you have access to the top
screws.
Step 8 – Tighten the 4 top screws – 2 on
each bracket - making sure the bracket
stays pushed down fully into the slot in
the speaker. These screws can be
tightened all the way so the heads sit
against the bracket.