Ivoclar Vivadent Tetric - Manual (Page 3)

Additional information
1. If fresh Tetric is applied to polished material, it must first
be roughened and wetted with Heliobond.
2. Tetric should have room temperature when applied. Cool
temperatures render the material difficult to extrude.
Warning
Unpolymerized Tetric should not come in contact with skin,
mucous membrane and eyes.
Unpolymerized Tetric may have a slight irritating effect and
may lead to a sensitization against methacrylates.
Commercial medical gloves do not provide protection
against the sensitizing effect of methacrylates.
Storage and hygiene
– Do not use Tetric after the indicated date of expiration.
– Storage temperature 2–28 °C (36–82 °F).
– Close syringes/Cavifils immediately after usage.
Exposure to light causes premature polymerization.
– Shelf life: see information on Cavifils, syringes and
packages.
– If Tetric is applied from the Cavifil directly in the
mouth of the patient, the Cavifil must not be used
for more than one patient due to hygienic reasons
(prevention of cross-contamination between patients).
– Syringes or Cavifils should not be disinfected with
oxidizing disinfection agents.
Keep out of the reach of children.
For use in dentistry only.
Date information prepared: 05/2010; Rev. 2
Manufacturer
Ivoclar Vivadent AG,
FL-9494 Schaan/Liechtenstein
This material has been developed solely for use in dentistry. Processing should be
carried out strictly according to the Instructions for Use. Liability cannot be
accepted for damage resulting from failure to observe the Instructions or the
stipulated area of application. The user is responsible for testing the material for its
suitability and use for any purpose not explicitly stated in the Instructions.
Descriptions and data constitute no warranty of attributes.
Tetric ®
Gebrauchsinformation
Beschreibung
Tetric
® ist ein lichthärtendes, röntgenopakes Composite für
die Füllungstherapie. Tetric härtet mit Licht der Wellenlänge
im Bereich von 400–500 nm (Blaulicht) aus.
Farben
Tetric ist in folgenden Farben erhältlich:
A-D Farben
Chromascop
Schmelzfarben:
A1
110
A2 140
A3 210
A3.5 230
A4 340
B2 130
B3 310
Dentinfarbe:
A3.5 Dentin
230 Dentin
Hochtransparente Inzisalfarbe:
T (Transparent)
Basisfarbe:
Basic White
Zusammensetzung Tetric
Die Monomermatrix besteht aus Bis-GMA, Urethandimet-
hacrylat und TEGDMA (Gesamtmonomeranteil:18.8 Gew%).
Die anorganischen Füllstoffe bestehen aus Bariumglas,
Ytterbiumtrifluorid, Siliziumdioxid und Mischoxid. Zusätz-
lich enthalten sind Additive, Initiatoren, Stabilisatoren und
Pigmente (Gesamtadditivanteil: 0.2 Gew%). Der Gesamt-
gehalt an Füllstoffen beträgt 82 Gew% bzw. 62 Vol%.
Die Partikelgrösse der anorganischen Füllstoffe liegt zwi-
schen 40 nm und 3 µm.
Deutsch
GI Tetric 2010_WE3_635686 Rev2_GI Tetric 2008.qxd 12.10.10 12:15 Seite 3