Ivoclar Vivadent SR Phonares II - Manual (Page 27)

27
Metal bonding
1. Condition the metal surface with SR Link
Roughen the metal surface by sandblasting it with Al
2
O
3
(100 µm, max. 2 bar/29 psi). Apply SR Link onto the
cleaned surface using a brush and allow to react on the metal surface for 3 minutes.
2. Opaque the metal surface
Both tooth- and gingiva-coloured opaquer pastes from the SR Nexco range of materials are available to
opaque the metal surface. Apply the opaquer with a brush and then light-cure according to the Instructions
for Use. To avoid the formation of smears, remove the inhibition layer of the opaquer with monomer. As an
alternative, the powder-based opaquer (Intensive Opaquer) of the SR Chromasit
® range of materials may be
used.
Please refer to the Instructions for Use of the respective material for more detailed information.
Bonding between tooth and C&B veneering materials
Bonding between tooth and denture base
ComPletion
Bond Conditioning
NHC
(Incisal and dentin core)
PMMA
(Back incisal and neck)
Denture
base
ProBase ® Cold ++ ++
Bond Conditioning
ProBase ® Hot ++ +++
SR Ivocap ®
High Impact
IvoBase ® Hybrid
IvoBase ® High Impact
++
++
+++
+++
SR Phonares II
or
or
or
or
or
or
or
or
Bond Conditioning
NHC
(Incisal and dentin core)
PMMA
(Back incisal and neck)
C&B
materials
SR Phonares II
SR Nexco +++
++
++
+++
++
++
Telio ® Lab
SR Ivocron ® Cold
Bond Conditioning
or
or
or
or
or
or
or or
++
good
+++
very good
Conditioning Cleaning Roughening
Applying
retentions by
grinding
Wetting