Ivoclar Vivadent SR Chromasit - Manual (Page 26)

26
Warnings
– SR Chromasit has been designed for use in dentistry.
– Avoid contact of the skin or eyes with uncured material
(pastes). Prolonged or repeated contact of the skin with
uncured material may cause a slight sensitizing reaction
and lead to a sensitization against methacrylate.
– SR Chroma Link, SR Link, SR Chromasit Fluid, SR Opaquer
Liquid and Retention Adhesive contain methyl methacrylate
and solvent. These liquids are easily flammable and irritant.
Keep away from sources of ignition. Do not smoke. Do not
breathe in vapours. Avoid contact with the skin and eyes.
Unpolymerized liquids irritate the eyes, respiratory system
and skin. Sensitization through skin contact is possible.
– Please observe danger signs on the individual primary
packagings and labels.
Cleaning
– Do not clean removable dentures with alkaline or similar
cleaning agents, as they severely corrode the surfaces and
the bonding layer.
– The use of a toothbrush and toothpaste is the best and
simplest way of cleaning removable dentures. If performed
regularly, this cleaning method effectively helps to prevent
the formation of deposits.
Repairs
Repairs in the laboratory
– The veneer to be repaired should be ground with a tung-
sten carbide bur or sandblasted at reduced jet pressure of
1 bar with aluminium oxide, 100 microns, or Ivoclar
Vivadent Special Jet Medium. Next, steam-clean and dry
with oil-free compressed air.
– Then, apply SR Spectrasit Liquid and allow to evaporate.
– Apply the light-curing SR Spectrasit to the prepared
surface.
– Next, apply Spectrasit Gel and polymerize the veneer in the
Spectramat for 5 minutes.
– Then, finish and polish the veneer as described above.
Repairs by the dentist
– The Ceramic Repair Set from Ivoclar Vivadent offers
dentists a comprehensive range of materials and
accessories to repair composite and ceramic restorations.
– Please refer to the Instructions for Use of the
corresponding materials for detailed information.