Ivoclar Vivadent Ivomat IP3 - Manual (Page 7)

This chapter is especially important for individuals who
work with the IVOMAT IP3 or who have to carry out
maintenance or repair work. This chapter must be read
and the corresponding instructions followed.
2.1 Indications
The IVOMAT IP3 has been especially developed for the
polymerization of dental resins and materials and should
be used for these purposes only.
Uses other than the ones stipulated are contraindicated.
The manufacturer does not assume any liability for
damage resulting from misuse. The user is solely
responsible for any risk resulting from failure to observe
these instructions.
Further instructions to assure proper use of the furnace:
– The instructions, regulations, and notes in these
Operating Instructions must be observed.
– The apparatus must be operated under the indicated
environmental and operating conditions
(see Chapter 9)
– The IVOMAT IP3 must be properly maintained.
2.2.1
Risks and dangers
Make sure that no liquids or other foreign objects enter
the air vents, since this may result in an electrical shock.
2.2.2
Risks and dangers
The housing must not be opened while it is connected to
the power supply, since there is a risk of electrical shock.
The connection cover may only be opened by a qualified
service center.
7
English
2. Safety First
IvomatIP3-5sp-sb.qxd 01.07.2005 16:12 Uhr Seite 7