Dixon 3000 Series - Manual (Page 18)

CONTROLS:
BLADE DRIVE: Models ZTR 3303 - ZTR 3304
Located to left of operator.
To engage the mower blade, turn lever on floor
slowly to the "ON" position.
To disengage mower blade, turn lever to the
"OFF position.
BLADE DRIVE: Model ZTR 3362
Located on control panel, on operator's right.
To engage the mower blades, lift switch up
lightly and push forward.
To disengage blades, pull switch backward.
Switch is clearly marked "on and off".
MOWER DECK CUT HEIGHT LIFT LEVER:
Located to left of operator.
Controls the cutting height.
Seven positions of adjustment.
Move lever in and forward to lower.
Move lever in and back to raise.
NOTE: Always use high for transport.
CIRCUIT BREAKER:
Protection of the electrical system is by
(1)15 amp circuit breaker.
If circuit breaker trips, push button to reset.
If this condition repeats, consult dealer for
inspection and repair.
Page 15