Ivoclar Vivadent EP 600 - Manual (Page 8)

8
1.1 Preface
Dear Customer,
Thank you for having purchased
the EP 600 Press Furnace. This
furnace with the intelligent press
drive has been especially
developed for the Ivoclar
Vivadent all-ceramic systems
(IPS e.max
® , IPS Empress ® ). It is
the latest of our technical high-
quality products. Inappropriate
use may damage the equipment
and be harmful to personnel.
Please observe the relevant
safety instructions in Chapter 2.
The EP 600 is designed
according to EN61010-1 and
thus complies with the relevant
EU regulations.
1.2 Signs and symbols
The signs and symbols in these
Operating Instructions and on
the furnace facilitate the finding
of important points and have
the following meanings:
Risks and dangers
This symbol marks
safety instructions that
must be followed to
prevent injury or death.
Furthermore, damage to the
furnace and/or laboratory may
be avoided.
Important information
This symbol marks
additional information
for correct and
economic use of the
EP 600.
Contraindication
Burn hazard
Risk of crushing
Furnace
Printer
Fuses
Vacuum
K-Module
(Communication
module)
Alternating current
(IEC 417)
Burn hazard
(IEC 417)
Risk of crushing
Outlet
(SELV, max. 24 VDC/A1)
PC printer connection
Display
PRESSING
Mode
IPS e.max
IPS Empress Esthetic
IPS Empress Layering
Technique
IPS Empress 2
Layering Technique
IPS Empress Cosmo
IPS Empress
Staining Technique
Note
Technical malfunction
Operating error
Saving active; do not
switch off the furnace
Timer active, programs
cannot be started
Energy-saving mode
active
1.3 Notes regarding the
Operating Instructions
These Operating Instructions
facilitate the correct, safe, and
economic use of the EP 600
Press Furnace. They are divided
into several, clearly structured
chapters. This should enable you
to locate specific topics quickly
and easily.
You must read these
Operating Instructions
To inform you about risks,
dangers, important information,
and contraindications, these
Instructions contain correspon-
ding signs/symbols to mark
important paragraphs.
We recommend keeping the
Instructions in a safe place near
the furnace to have immediate
access to the information if
necessary.
Should you lose the Operating
Instructions, extra copies can be
ordered at a normal fee from
your local Ivoclar Vivadent
Service Center.
Furnace concerned:
EP 600 Press Furnace
Target group:
Dental technicians
and technologists
1. Introduction / Signs and Symbols
V ~ 110-120 A max. 2.1 Ableitstrom / Leakage current max. 0.75 mA
T5A T12A T2A
250VAC
RS 232